Maytag Washing Machine Parts

Includes latch assembly, one white and one gray lid lock bezel. Lid must be closed for washer to fill, wash, drain, or spin. If the machine is not advancing into the cycle or is displaying a lid lock fault this may be the cause of the issue.

OEM Part - Manufacturer #W10404050

Drive Splutch Kit. This kit has 6 parts; a spring, housing, cam ring, basket drive gear, pulley, and nut. The pulley is driven by the drive belt and the splutch works with the mode shift actuator to operate the washplate and spin the inner basket. A worn splutch can cause spin or washplate problems.

OEM Part - Manufacturer #W10721967

The drive belt wears out over time. You may want to replace the drive belt while the washer is apart.

Fabric softener dispenser

OEM Part - Manufacturer #8575076A

Washing machine tub counterbalance spring. This spring offsets the weight of the motor on the front of the washer. If broke, the tub will lean forward and the tub will be off balance during the spin cycle.

OEM Part - Manufacturer #WPW10250667

High temperature adhesive for installing rubber and felt seals, 2 ounces.

OEM Part - Manufacturer #WPY055980

Washing machine door boot. If the washer is leaking, the door boot may have a tear in it. Overloading the washer is the most common cause for a torn door boot.

OEM Part - Manufacturer #WP8182119

Check out the Related Items for boot seal clamps and a good washing machine cleaner.

Self-tapping screw.

OEM Part - Manufacturer #WP489483

Washer belt kit for Maytag models. If the washer does not agitate, spin, or drain then one of the belts could be worn and require replacement. Belt sizes: 41 in x 5/16 in, 42-1/3in by 7/16 in

OEM Part - Manufacturer #12112425

Door boot seal

OEM Part - Manufacturer #W11106747

Washing machine mode shift actuator. The actuator serves several functions. It has a synchronous motor that shifts the splutch cam ring and monitors the position of the splutch. It also houses a transmission speed/position optical sensor.

OEM Part - Manufacturer #WPW10006355

Consider replacing the washer drive belt while you have the washer apart.

Washer agitator bolt with rubber gasket and thread sealant. Head is 7/16 inches in diameter.

OEM Part - Manufacturer #WP358237

Light bulb, 10 watt.

OEM Part - Manufacturer #WP22002263

Stacking kit for hybrid dryer

OEM Part - Manufacturer #W10869845