Maytag Parts

EveryDrop Ice & Water Refrigerator Filter 4 reduces 23 contaminants, including lead and mercury, asbestos, and industrial chemicals. Each filter provides 300 gallons of filtered water and should be changed every 6 months to ensure proper contaminant removal and flow rate. NSF certified.

OEM Part - Manufacturer #EDR4RXD1

Replace filter every 6 months or 300 gallons to maximize contaminant reduction

Chrome drip bowl (also called a drip pan) for 8 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner.

OEM Part - Manufacturer #WPW10196405

Dishwasher upper mounting bracket. Screws sold seprately. Please see related items below.

OEM Part - Manufacturer #WP8269145

Washer drive motor coupler. New style with metal sleeves for added strength. This version replaces all previous motor coupler styles and versions. For direct drive washing machines. Common symptom of failed coupler is washer will fill, not agitate or spin but will drain the water from the tub.

OEM Part - Manufacturer #285753A

Helpful tool is the suggested Multi-Bit Screwdriver

Dishwasher door latch and handle assembly, black. The front of handle is a 1/2 inch wide. If the dishwasher won't start then the latch assembly could be defective.
*The white handle has been discontinued.

OEM Part - Manufacturer #WPW10130695

Dishwasher should be cleaned regularly to optimize the wash performance.

EveryDrop Ice & Water Refrigerator Filter 2 reduces 24 contaminants including lead, pesticides, and asbestos. Each filter provides 200 gallons of filtered water and should be changed every 6 months to ensure proper contaminant removal and flow rate. NSF certified.

OEM Part - Manufacturer #EDR2RXD1

Replace filter every 6 months or 200 gallons to maximize contaminant reduction

Dishrack adjuster arm

OEM Part - Manufacturer #WPW10546503

40 Watt frosted appliance light bulb.

OEM Part - Manufacturer #8009

Dryer door switch assembly. If the dryer does not start then the door switch could be defective. This switch also replaces the two wire switch.

OEM Part - Manufacturer #WP3406107

Dryer heating element. If your dryer does not heat first check for a blown thermal fuse on the blower housing before replacing the heating element. In most cases the heating element will have a break in the element if defective. *May need wire connector to install heating element.

OEM Part - Manufacturer #279838

The heating element and many other parts can be tested using a volt/ohm meter which is a handy item to have in any do it yourselfers tool box.

Dryer drum drive belt, 93 1/2 inches long, 4 ribs 3 grooves. The drive belt is a very long, slender belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley. If the drum will not turn when the dryer is turned on the belt is likely broken.

OEM Part - Manufacturer #661570V

Chrome drip bowl (also called a drip pan) for 6 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner.

OEM Part - Manufacturer #W10196406RW

Rear drum support roller kit. This kit contains two drum support rollers. If the drum rollers are worn out, the dryer may not turn properly or may be excessively noisy. Be aware that the drum bearings are self-lubricating; it is not necessary to lubricate them yourself.

OEM Part - Manufacturer #349241T

The drum rollers and drum roller axles often wear out at the same time. If the drum roller axles are worn out, replace them along with the drum rollers.