Maytag Washing Machine Parts

Washing machine drive belt. 51 1/8" long and 3/8" wide. Medium v- shaped. If the motor runs, but the washer won't agitate, spin, or drain, the drive belt is likely broken or worn out.

OEM Part - Manufacturer #WP21352320

Outer tub and drive shaft repair kit. If the washer is noisy during the spin cycle or is leaking from the bottom of the tub this kit may be needed. Bearing and seal tool required to install this kit. See Related Items below.

OEM Part - Manufacturer #W10435302

The suggested tool is required to install this kit according to the manufacturer. This part no longer comes with instructions in the box. Please enter the manufacture's part number in at Servicematters.com.

Washing machine drain pump. *Coin trap only available with pump assembly. If the washer does not drain the pump could be locked up or a small object may be clogging it. Also a small leak in front of the washer could be caused by a defective pump.

OEM Part - Manufacturer #WPW10730972

If your washer smells we recommend cleaning it with Affresh once a month.

Latch

OEM Part - Manufacturer #W11307244

Washing machine lid hinge pin retainer

OEM Part - Manufacturer #WP35-2044

Consider replacing the hinge pin too.

Washer lid lock. Be aware the manufacturer has updated the part and it is now white and clips into the main top without mounting screws. If the washing machine does not spin the lid lock may be defective.

OEM Part - Manufacturer #WPW10619844

Washing machine drain pump assembly. If the washer does not drain the pump may be clogged, damaged, or defective.

OEM Part - Manufacturer #280187

If your washer smells we recommend cleaning it with Affresh once a month.

Washing machine main tub seal

OEM Part - Manufacturer #W10814296

Washer drive block for inner tub. A worn drive block may cause the washer to spin slowly, causing the clothes to be soaked at the end of the cycle. The washer may also make a loud knocking noise at the beginning of the spin cycle.

OEM Part - Manufacturer #WP389140

Shock absorber. This shock absorber prevents the washer from vibrating by absorbing the movements of the washer tub.

OEM Part - Manufacturer #W10822553

Washing machine agitator repair kit. Includes agitator cam and 4 directional cogs (also called dog ears). If the upper section of the agitator isn't turning properly, then the agitator cam and dog ears are likely worn-out and require replacement.

OEM Part - Manufacturer #285751

To purchase the dog ears separately, order item 3109.

Water inlet valve and inlet assembly with thermistor for water temp sensing. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.

OEM Part - Manufacturer #WPW10144820

Washing machine tub suspension pads (package of 3). These pads help to absorb the movement of the washer tub. If a tub pad is worn, the washing machine will be unbalanced and will vibrate or shake during the spin cycle.

OEM Part - Manufacturer #285744