Maytag Parts

Door gasket, gray

OEM Part - Manufacturer #W10830162

Dryer high-limit thermostat, L250-80, with terminal extension arm. This thermostat should be closed for continuity at room temperature and opens at around 250 degrees Fahrenheit. If the dryer won't heat, the high-limit thermostat might be defective.

OEM Part - Manufacturer #WP3977767

The part may look different than the original but the part will still install and work the same.

EveryDrop Ice & Water Refrigerator Filter 5 reduces 16 contaminants, including lead and mercury, asbestos, and industrial chemicals. Each filter provides 240 gallons of filtered water and should be changed every 6 months to ensure proper contaminant removal and flow rate. NSF certified.

OEM Part - Manufacturer #EDR5RXD1

Replace filter every 6 months or 240 gallons to maximize contaminant reduction

Door boot seal

OEM Part - Manufacturer #W11106747

Heating Element

OEM Part - Manufacturer #W10703867

Dryer drum roller axle. If the dryer is noisy this roller axle or the roller itself may be worn and require replacement.

OEM Part - Manufacturer #WP6-3129480

The Whirlpool Burner Igniter Kit 279311 is a high-quality replacement part that ignites gas to light the dryer burner. It replaces multiple igniters and requires safety precautions and disconnection from utilities before installation.

OEM Part - Manufacturer #279311

Consider replacing the gas valve coils while you have the dryer apart.

The Replacement Ice Maker Unit, Model No. RIM597, is a high-quality modular style ice maker that is compatible with Kenmore, Whirlpool, and KitchenAid refrigerators. Part No. RIM943 works with 797991, 625601, 4210317, and 4317943.

OEM Part - Manufacturer #4317943

If your old water line has a kink or starts to leak, it should be replaced. A water filter can also be added inline with the copper supply line to improve the quality of your ice.

Drive clutch kit

OEM Part - Manufacturer #285785

Washer main drive belt. This belt is located under the washing machine and is used to drive the splutch pulley. It goes around the motor & splutch pulleys. Worn or broken drive belt can cause spin or washplate problems.

OEM Part - Manufacturer #WPW10006384

2 Terminal door switch

OEM Part - Manufacturer #W11384469

Dryer thermistor. This thermistor should read approximately 11.9K Ohms of resistance at 70 degrees Fahrenheit (21’ Celsius). If the thermistor is defective, it may prolong or shorten the drying time or cause a fault code. A defective thermistor is not responsible for a dryer not heating.

OEM Part - Manufacturer #WP8577274

Dryer heating element. If the dryer no longer heats then the heating element may have failed, but it is not the most common cause. The most common cause for a dryer to stop heating is a blown thermal fuse.

OEM Part - Manufacturer #WP8544771