Maytag M8RXEGMXB00 Refrigerator Replacement Parts

Add on ice maker kit with 5 pin wire harness

***see related item number 4985949 if appliance has a 4 or 8 prong connector

A water filter can be added to a new water supply line or to an existing line to improve the taste of the ice.

2 Terminal door switch

The Replacement Ice Maker Unit, Model No. RIM597, is a high-quality modular style ice maker that is compatible with Kenmore, Whirlpool, and KitchenAid refrigerators. Part No. RIM943 works with 797991, 625601, 4210317, and 4317943.

If your old water line has a kink or starts to leak, it should be replaced. A water filter can also be added inline with the copper supply line to improve the quality of your ice.

White Touch Up Paint

Refrigerator defrost thermostat. The thermostat clips onto the evaporator. If the refrigerator does not defrost both the thermostat and heater can be tested to determine which part is at fault.

Use standard wire connectors to wire in new defrost thermostat.

Refrigerator evaporator fan motor with incorporated wire harness. If your fan motor does not have an incorporated wire harness, please see related item below. When the evaporator fan motor fails, it often generates a lot of noise in the freezer area.

Crisper drawer

Refrigerator icemaker water inlet valve. If the icemaker is making small or hollow cubes then the water inlet valve may be restricted and require replacement.

Black Touch-up Paint

Hinge shim

Screw, 8-18 x 3/8

1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.

All-purpose silicon grease, ½ oz. Not food grade.