Maytag Washing Machine Parts

Residential Washer Hoses- Fits most major washer brands. • Provides hot & cold water to the washer • (2) 4 Ft. hoses for hot & cold water • (4) Built-in O-rings • Anti-leak crimp
It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

OEM Part - Manufacturer #8212546RP

Washer fill hose gasket and screen set of four

OEM Part - Manufacturer #285452A

Washer main tub seal. Located in the center of the outer tub at the transmission basket drive shaft. If the washing machine is leaking water from above the transmission this seal is likely damaged or worn out.

OEM Part - Manufacturer #W10324647

Washing machine drain hose extension connector kit

OEM Part - Manufacturer #285835

Transmission assembly

OEM Part - Manufacturer #W11454372

5 Foot fill hose for hot or cold water

OEM Part - Manufacturer #WP89503

Over time, rubber hoses dry out and become susceptible to leaks or bursts. Replace fill hoses every 5 years to reduce the risk of hose failure.

9 Foot drain hose extension kit

OEM Part - Manufacturer #285666

Lid bumper

OEM Part - Manufacturer #WP9724509

Drain hose extension kit *4 foot

OEM Part - Manufacturer #DRNEXT4

White Washer Lid Strike. The strike is what the lid lock hooks onto to lock the washing machine lid. If the washing machine is not advancing into the cycle or is displaying a lid lock fault this may be the cause of the issue.

OEM Part - Manufacturer #WPW10239968

<b>REMOVING THE LID STRIKE ON GLASS LID MODELS </b><br> 1. Push a small screwdriver into the hole of the lid strike to release a locking tab. <br> 2. Turn the strike counter clockwise. <br> 3. Pull the strike out of the mounting hole.

Washer for agitator bolt

OEM Part - Manufacturer #WP3949550

Drain Hose Extension Kit. 3’ 6” Long with a goose neck oft 6”

OEM Part - Manufacturer #40922

Drip tray. Fits under washing machine and prevents floor damage. Protects floor from scuffs, spills and overflows. Includes optional drain adapter. 29 1/4" x 31 1/4" outside dimensions. 27" x 29" is the usable size. The unit curves up after those dimensions. Approximately 1.5 inches deep

OEM Part - Manufacturer #8212526