Drum seal (front or rear) . 79 inches.

OEM Part - Manufacturer #WP314820

Some dryers have this seal secured with metal tabs while others require the recommended High Temperature Adhesive below. Best to check out the seal before ordering.

6 Foot fill hose, one straight & one elbow, requires 2 washers

OEM Part - Manufacturer #WP76314

Replace inlet hoses after 5 years of use to reduce the risk of hose failure.

Maytag two belt washing machine drain pump. If the washer does not drain then the pump could be clogged or defective.

OEM Part - Manufacturer #WP6-2022030

Consider replacing the belts while you have the washer apart.

Screw, 10-24 3/8

OEM Part - Manufacturer #WP90767

Washing machine tub bearing repair kit. The tub bearing is mounted in the middle of the outer tub of the washing machine. The tub bearing helps to keep the inner tub spinning smoothly. If the tub bearing is defective, it may lock up and prevent the washer from spinning.

OEM Part - Manufacturer #6-2040130

The tub bearing and tub seal should be replaced together.

Hose clamp

OEM Part - Manufacturer #WP596669

Universal Connect Flexable Vent. 4" diameter extends to five feet.

OEM Part - Manufacturer #4396009RP

Hose clamp

OEM Part - Manufacturer #WP285655

Dryer high-limit thermostat, L220-40F. If the dryer overheats, this high-limit thermostat will cut off the power to the heating element. If the high-limit thermostat has blown, the dryer won't heat.

OEM Part - Manufacturer #WP303395

Washer water inlet valve . If multiple inlet valves are listed for your model call customer service with your model number and serial number to determine which is correct.

OEM Part - Manufacturer #WP22001274

Tub to pump drain hose

OEM Part - Manufacturer #WP213045

Door catch kit, includes catch and clip (metal) Replace both parts for best results

OEM Part - Manufacturer #LA-1003

Adjustable leveling leg with stop-nut

OEM Part - Manufacturer #22003428